Luscan Group

• Acrylic  • Sleek and modern design  • Display your phone for easy access  • Fits most devices  • Lightweight and easy to clean  • Bulk packed  • Phone not included  • iPod® is A Registered Trademark Of Apple Inc.  • Quantities ordered must be divisible by 25 pieces (minimum 25 pieces per colour)  - Imprinted minimum 125 pieces  - No imprint minimum 25 pieces 

Colors: All: Black, Lime Green, Orange, Red, Royal Blue, White

Size: 2" W x 2.25" H x 2.25" D 

Imprint Area(s): PAD 1C – 1.5" W x 0.63" H (front upper cradle)  PAD 1C – 1.5" W x 0.63" H (back upper cradle) 

With Donald's one meter charging cable holder, there will be no more taking a call crouched near a wall socket because your charging cord won't reach far enough! Its 2-in-1 plug is ideal for both Android and IOS phones and devices and with the anti-tangle woven nylon cord and handy matte black metal snap button to hold everything securely and neatly in place, you won't get yourself tangled up.

Colors: All: BLACK, BLUE PMS 661, GREEN PMS 7495, ORANGE PMS 1505, RED PMS 200

Size: 39.000"

Imprint Area(s): Portrait :Below snap button: (0.750" x 0.438")

The Hudson is your car's built-in smartphone holder! Clip this handy rubberized holder to your car's air vent, stick either the round or rectangle metal plate to the back of your phone and then magnetically attach your phone to the holder. Nothing could be simpler. With Hudson safely at eye level, no more taking your eyes off the road and fumbling to manage your tunes and navigate directions.

Colors: All: BLACK

Size: 1.750" x 1.750" x 1.375"

Imprint Area(s): Plate Base: (1.000" x 1.000")

• TPU  • Waterproof pouch  • Removable neck strap  • Use poolside or at the beach  • Helps protect your device from water damage  • Clear plastic allows you to use device  • Designed for use with larger phones  • Follow enclosed instructions to test first to ensure you do not cause damage to your device  • Phone not included 

Colors: All: Black

Size: 4.5" W x 8" H x 0.5" D 

Imprint Area(s): PAD 1C – 0.6" W x 0.35" H (front top black plastic)  PAD 1C – 1.5" W x 1" H (back bottom clear area)  PAD 1C - 2" W x 1.5" H (back top black area/front clear area)  Note: Front clear area not recommended 

• 3mm Neoprene  • Clear PVC pocket to hold phone  • Hidden pocket on the back for key storage and other small items  • Adjustable hook and loop fastener to secure around your arm  • Helps protect your device from scratches and bumps  • Opening for audio jack at the bottom  • Plastic hardware  • Fits larger phones like iPhone® 6, Samsung Note plus more  • Phone and accessories not included  • Phone not included  • iPhone® is A Registered Trademark Of Apple Inc. 

Colors: All: Black

Size: 6" W x 7" H 

Imprint Area(s): TR PP PS – 2" W x 0.75" H (left side opposite hook and loop fastener)  SP 1C – 2" W x 2" H (front window)  Note: Front window imprint not recommended 

See the world in a whole new way and take your mobile photography to a whole new level! This clever clip on lens kit includes three interchangeable lenses for a variety of visual effects. Use the fisheye lens to create a hemispherical effect on your photo, use the wide-anglelens for increased panoramic range (great for group photos or landscapes) or use the macro lens to magnify close-ups. Like many little valuables, the Mirage comes with a velvet travel pouch so there is no excuse not to bring it everywhere! Please take a note that the Wide angles lens and the Macro lens are shipped in the velvet drawstring pouch attached together.

Colors: All: BLACK

Size: 2.500" x 0.688"

Imprint Area(s): Opposite Lens Holder: (1.000" x 0.375")

• Twill Nylon  • Top zippered closure to main compartment  • Two side slash pockets inside main area  • Bottom compartment with zippered closure  • Waffle elastic straps in bottom area  • Padded to protect your tech accessories  • Keep all of your tech gadgets organized in one place  • Can also be used as a cosmetic/toiletries bag  • Contents not included 

Colors: All: Black/Grey

Size: 8.5" W x 4.5" H x 4" D 

Imprint Area(s): TR PP PS – 4.5" W x 1" H (front) 

• 300D Heathered Polyester  • Dual tone pattern  • Three sided double zippered closure for easy access to contents  • Top carry handle  • Front open slash pocket  • Inside features three detachable dividers that secure with hook and loop fasteners and five elastic mesh slots  • Inner 210T/PU liner with 3mm Foam padding  • Padded to protect your tech accessories  • Keep all of your tech gadgets organized in one place  • Contents not included 

Colors: All: Black

Size: 9" W x 6.5" H x 2.25" D 

Imprint Area(s): SP 2C TR PS – 4" W x 2" H (front pocket)  LP (front pocket) 

The purpose of power is to give it away and with the Turbo wall charger you will be able to accomplish this efficiently. With 4 USB ports, you will be able to charge several devices at the same time without it taking too much space. Turbo's generous decorating area makes it a powerful brand ambassador. Just fold the pin to make this wall charger more portable and bring it along with you on your travels. The Turbo has a maximum output power of 4.8A (1.2A per port when each one is in use). For higher capacity electronic devices (such as a tablet), any of the USB ports can provide up to 2.4A of output power for a fast and efficient charge.SPECTECH-POWER PRODUCTS HAVE A ONE YEAR WARRANTY ON ELECTRONIC PARTS FROM DATE OF PURCHASE

Colors: All: WHITE

Size: 2.250" x 3.000" x 1.125"

Imprint Area(s): Centered On Either Side: (1.500" x 2.250")

The MagClick(R) Phone Ring Holder and Stand can magnetically attach to the back of iPhone 12/13 models or any MagSafe case. The ring can flip 180 degrees and rotate 360 degrees to create the most comfortable angle to support your phone in your hand or on a flat surface. The ring holder and stand can be easily removed so you can wirelessly charge your phone. Even better, it won't leave behind residue like other ring holders and stands.

Colors: All: Black (BK)

Size: 0.01" H x 2.20" W x 0.11" D

Imprint Area(s): Hinge Top - Centered on Round Panel (0.68 "D)